• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Shanghai, China (Mainland)
  • Brand Name: Ce Zhen
  • Model Number: YD62
  • Usage: Speed Sensor
  • Theory: Hall Sensor
  • Output: Analog Sensor
  • Signal frequency: 0~20 kHz
  • Power supply: 5 ~ 26V ( DC )
  • Load resistance: ≥1.0kΩ
  • Detection distance: 1 ~4.0mm ( A3 steel, electrical steel )
  • Module of gear: m≥1
  • Mounting screw: M16 x 1 ( or custom it)
  • Working Temperature: -40~+120degree
  • Certificate: ISO9001-2008
  • Application: Gear Pump,Turntable with magnetic material ,etc
  • Explosive-proof Grade: Exiall BT6 Ga

Packaging & Delivery

Packaging Details Carton
Delivery Time About 7 days after 100% paypment

YD62 Most popular hall effect speed sensor



Brief Introduction


YD62 hall speed sensor adopts Hall effect, when the metal tooth go through the front end of the hall sensor, causing the magnetic field changes,  the hall element detect this changes and converted into a  alternating electric signal, the built-in circuit of sensor amplifies the signal, shaping, output good rectangular pulse signal, measuring  frequency range more range, the output signal more accurate and stable, easy installation, prevent oil and waterproof, have been widely used in the field of power , automotive, aviation, textiles and petrochemicals guns. 



Technical parameters

1. Operating Voltage Range5~ 26V  ( DC )

2. Signal frequency: 0~20KHz 

3. Module of gear: m≥1(involute gear)

4. Output signal: square wave, the peak-peak value equal to the the amplitude of voltage,  unrelated to speed, maximum output current 20mA, 

5. Operating temperature: -40~+120°C

6. Thread specification: refer to selection guide 

7. Teeth gap: 1~2mm 

8. Weight: about 120g 

9.IP Grade:IP68

10.Detection Distance:1~4mm(A3 Steel,Electric Steel)

                                        5-10mm(Magnetic Steel,Magnetic Consistent During Istallation)


                                                                             Figure 1

                                                                                                                  Figure 2

                                                                                                                     Figure 3


Gear speed

The teeth using metallic material with big permeability such as 45 steel, toothed is involute tooth, the teeth gap and tooth width have great impact on the speed measurement, when teeth gap is too small,may result in the sensor no output, and seriously affect the measurement, therefore teeth processing according to request.


                                                                                                  Figure 4 Gear diagram 

Module of gear:2~4              Teeth width b:>2




m:Module of gear


z: Number of teeth 










Sensor installation pls refer to figure2, a magnetically permeable material(such as iron, steel,ect) as teeth installed in the measured shaft, the gear be processed to involute teeth, the modulus will larger than 2. Hall sensor, reluctance sensor, eddy current sensor mounted the bracket, radially aligned with the gear, installation gap between0.5~2mm, sensor signal output cable are 3 cores shielding line, lead wire refer to figure2.




Selection guid 


Model: YD62-B◊◊-C◊◊


Horse length: B◊◊


             01: 65mm


             02: 117mm


             03: 148mm


Thread specification: C◊◊


             01: M16*1.5


             02: M16*1


             03: M12*1


             04: M10*1


             05: M18*1.5


             06: special required




Example: YD60-B02 mean 117mm length YD62 hall speed sensor






Our factory




Similar product



1.What kind of sensor do we do?

We do all major sensor type:

a.Vibration sensor,two-wire integrated vibration transmitter.

b.Two/three-wire integrated or split-type eddy current displacement  sensor.

c.Rotation speed sensor:passive magnetic or hall speed sensor.

d.(Vibration,speed,displacement )transmitter.

e.Piezoelectric (speed,acceleration) sensor.

f.Meter series:kinds of monitor.

g.Portable vibration meter series

h.Fault monitoring and diagnose system.

i.Sensor calibration equipment series.

2.How to get your offer?

Please send us your specification and product model ,quantity you want,we will send you our best quotation.

3.If i did not use sensor before,how shall i do?

It does not matter,please tell us some key  teachnical parameters and the order quantity,we'll choose you most suitable one  and give our best service.

4.How to place the order?

If you accept the price,we would send you the profoma invice to arrange the payment.

5.How long is the production time after placing the order?

It would take 7-10 days ,anyway,when you place the order,we would comfirm the delivery time to you.

6.How do you send the goods?

We normally send the goods by DHL,FEDEX,UPS,TNT through our agent.And it will take 3-5 days for shipping.

7.Why choose us?

-Gald manufacture and suppier have cooperated with alibaba over 5 years.

-Accept OEM .

-Good quality.

-Accept small order as lowe as 1 piece.




Packaging & Shipping


Packaging with plastic box saperated packing;

1 piece,2 pieces,5 pieces,10pieces per master caton or any ways you want;

10 pieces standard size sensors,gross weight is about 3kg.







Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland) | Manufacturer, Trading Company
Transaction Level:
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $30,000
Learn More